New Models & Products
NEW MODELS & PRODUCTS
THE CHALLENGER
J&R, the oldest name in two-stroke motorcycle exhaust systems, introduces the Challenger series, a bold new line for four-stroke motorcycles that really takes the state of the art a step farther. Increased lean clearance and excellent muffling. Each system comes with the exclusive J&R “Retro-flow” mechanical baffle, plus a high-performance glasspack silencer. Outstanding features include: upswept cafe styling, rubbermounted bracket, positive-action centerstand stop, a complete gasket set on some models and detailed tuning instructions. Systems are available in
black, chrome or metalspray aluminum and are warrantied. For additional information write to: J&R Expansion Chambers, Dept. CW-4, 1967 Glasseil St., Orange, CA 92667. (714) 998-6410.
REBUILDABLE BETORS
Betor America Corp. announces the availability of eye-to-clevis shock absorbers in 11-3/4-in. length for Hondas. These chrome-plated shock absorbers include chrome 90/120 two-stage springs and provide a quick, easy and safe method of lowering Honda customs. These shocks are also available for eye-to-eye mounting, and, like all Betor shocks, are completely rebuildable. Write Betor America Corp., Dept. CW-4, P.O. Box 328, Lewistown, PA 17044.
THE NEW CHAMPION
Champion Racing Frames goes motocross with its new long-travel rear suspension XL250-350 Honda frame. The frame complements the XL engine by providing light and precise handling. Designed to accept stock or Elsinore parts, the total weight without gas is 238 lb. Perfect for motocross, cowtrailing or enduro riding. Call or write Schwerma Products, Dept. CW-4, 23684 Clawiter Road, Hayward, Calif. Telephone: (415) 782-3121.
(Continued on page 90)
SOURCE OF TENSION
Because of the tremendous popularity of long-travel rear suspension, ProTec has developed a chain tensioner and guide specifically designed for those suspension systems.
The Pro-Tec bolts on easily and keeps the chain tight. But when the suspension compresses, the tensioner allows it to move with the motion without snapping. It’s much safer than running a sloppy chain to cope with long-travel.
Available for $21.95 at your local dealer or from Pro-Tec, Dept. CW-4, 8423 Rosemead Blvd., Pico Rivera, CA 90660. (213) 869-7346.
THESE BOOTS ARE MADE BY HONDA
The fine styling of Hondaline’s Street/Touring boots will find their tasteful owners wearing them just as much off a motorcycle as on. Available in black or brown, they’re more than fitting for office wear. The hard box toe and heel and ankle pad are covered with specially treated scuff-resistant leather. The shins are padded to relieve some of the hard knocks of life. One special little something extra is a key pocket in the right boot. The full-gusseted wind and waterproof heavy-duty zipper tops off this stylish riding boot. For walking or riding, get into a pair at your Honda dealer. (Continued on page 94)
HEADGEAR
Trabaca Products has a new full-face helmet that is the result of two years of research and engineering. With the help of the Mobay Chemical Company they’ve developed an all-new “Uraliner” that is said to provide maximum protection to the wearer. A recent test to D.O.T. 218 standards showed the Preferred helmet to limit the G forces allowed to be transmitted through the helmet to the head to a maximum of 186 Gs. The maximum allowable by the D.O.T. U8 Standard is 400 Gs, so the Preferred helmet exceeds the G force requirement by 50 percent.
The KRW Preferred helmet is available in white, metallic silver and metallic gold, and has a suggested retail price of $64.75. Contact Trabaca Products of California, Inc., Dept. CW-4, 3170 Airway Ave., Costa Mesa, CA 92626. (714) 556-6965.
SUZUKI SWINGING ARM
Motocross Center has a new lightweight chrome-moly swinging arm for the Suzuki RM250 and 370. The unit is fabricated with aircraft quality 4130 chrome-moly tubing, well-placed gussets and box design at the axle area to give it a superior strength-to-weight ratio.
Motocross Center says the problem of flexing (especially prevalent with the higher horsepower and torque of the 370) has been completely eliminated. The swinging arm is nickel-plated for maximum durability and good looks.
The swinging arm kit comes complete with heat-treated chrome-moly axle, needle bearings, chain adjusters, tie rod and miscellaneous hardware. Installation is quick. . .it just bolts on. Immediately available from Motocross Center, Dept. CW-4, 643 E. Arques Ave., Sunnyvale, CA 94086, at $ 1 19.50 each.
NEW LINE OF LEATHERS
Yamaha has entered the leathers market with its own brand of official competition riding pants. Constructed of tough, yet lightweight and pliable, hand-selected goatskin, the new leathers from Yamaha offer maximum protection, wear like iron, and are tailored for comfort in all riding positions.
After exhaustive appraisal of existing leathers now on the market, and extensive testing under racing conditions, Yamaha designed and produced their leathers to combine the best features of all makes now offered for sale, plus special characteristics of their own.
Some of the features incorporated in Yamaha riding leathers include “saddle seat” design for comfort, extra durability and the prevention of split seams; thick padding on all critical areas, with additional padding around the pelvic bone and hip area; an exclusive “flex crotch” that stretches and bends with the rider’s movements; tapered and zippered leg bottoms that tuck neatly into boots without bunching, riding up or pulling out; plus a zipper fly that lays flat; padded shin area for protection of sensitive leg bone area exposed above the boot line; removable high-impact knee cups constructed of material similar to that used in helmet liners; and a heavy-duty nickel-plated adjustable belt buckle to insure a comfortable fit.
Yamaha leathers also boast a full inner lining of nylon tricot, soft, smooth and it breathes, keeping body perspiration to a minimum and adding greatly to rider comfort.
Yamaha competition riding leathers are available in a full range of waist sizes from 28 to 38, and may be ordered in either black or Yamaha gold, each with a contrasting accent stripe imprinted with “Yamaha.” Retailing for approximately $90, the leathers are available only through Yamaha dealers. [§]
