2015 Yamaha Sr400

Ignition

ENERGICA EGO 2015 HONDA CRF250F 2015 HARLEY-DAVIDSON ROAD GLIDE 2015 KTM1290 SUPER ADVENTURE

THE RIDE STARTS HERE

2015 YAMAHA SR400

CW FIRST RIDE

Yamaha brings back its street thumper

Mark Hoyer

For any retroloving motorcycle enthusiast, the eye glides along the sweet, svelte lines of the 2015 Yamaha SR400 just like it did in 1978— because Yamaha got it right back then and correctly chose not to change much since. But the defining element of the new-again-to-the-US Yamaha single is the kickstarter that folds out on the right-hand side of bike. It’s your one and only way to start the bike. And that is excellent.

It was a sunny, beautiful California summer day for our first ride on the bike in Venice Beach. After we made our way to the shiny-fendered row of “Liquid Graphite’-painted bikes, Yamaha Product Planner Derek Brooks gave us “training” on how to start one. As a Velocette MSS, Norton Commando 850, and Yamaha RD350 owner, I felt fully qualified. But there was a guy on the ride who said he’d never kickstarted a motorcycle. The very idea...

Kickstarting the SR400 is a (mostly) vintage experience made modern and easy with electronic fuel injection. The 399CC single retains the sight glass on the cam that allows you to observe when the engine is in the optimal position for kickstarting. It’s really not necessary to use it, but it is helpful

for figuring it out at first. Basically, just kick through to get the piston up against compression, pull the left-bar-mounted decompression lever, and take the piston a bit past TDC. Then give a smooth, swift kick like you mean it, but without violence, and it will start every time, hot or cold, no choke ever required (because there isn’t one). I find satisfaction in kicking a bike to life. Others may not. Particularly if they stall at a light or some other terribly inconvenient place.

Luckily, the SR400 is pretty hard to stall. Fueling is excellent, and bottom-end torque is ample (relative to the displacement). A forgiving clutch and a substantial amount of flywheel inertia make leaving stops easy and smooth. Unlike old carbureted singles, which have a tendency to randomly flame out at idle or on transitional throttle once in a while, the SR400 just chuffs along at a dead smooth idle and

Enjoying the classic riding position (and flat seat) on the revived Yamaha 5R400 single-cyli~ej,f stand~f

BY THE NUMBERS

24

HORSEPOWER: 5R400 output, measured at rear wheel

19781981

`IORT RUN Yeas the R5OO WdSIfl teitoth~ 5

responds to throttle consistently. On the CW dyno, the engine produced 24 hp at 6,400 rpm and 21 pound-feet of torque at 5,500. The second number is a bit misleading because there is also a 20 pound-foot peak at around 2,500 revs, with a little dip in the midrange before it rises again. Redline is 7,000 rpm.

It’s a reasonable amount of horsepower for running around town, and it carries the SR400 through its five gears to 80 mph (and beyond) without too much drama, but maintaining cruise speeds of more than 65 mph raises the vibration level quite a bit. It’s livable at high speeds but more lovable at 60 mph and under.

The KYB fork has soft springing and light damping that made my short city ride pretty comfortable. I kicked up the rear spring preload stepped adjusters on the also-KYB dual shocks (using tools from the good tool kit) to better carry my 220 pounds. While I wouldn’t describe suspension action as

supple, the freeway compliance of this Yamaha is decent, and steering is light and sure.

Small and compact, the SR400 is a claimed 384 pounds fully fueled and ready to ride. A 30.9inch seat height and exceptional narrowness make the bike very easy to handle and a flat-footer at stops for most any fully grown human. That seat also proved to be supportive and comfortable. There is something to be said for a flat “vintage” seat of this design. Wheelbase is just 55.5 inches, and the bike is very agile. Need to take a riding test to get your license? The SR400 is a great candidate.

It’s a little ironic that the 2015 model has wire-spoke wheels with inner tubes and a rear drum brake when the original 1978 SR500 had front and rear discs and cast wheels with no tubes. But Yamaha is trying to accomplish something different here. In ’78, the bike was a modern interpretation of a classic British 500CC single. Today, the SR400 is a classic

interpretation of itself, so to speak. Oh, and if you are wondering why it is 399cc, it’s due to tiered licensing in Japan, where getting a license for 400CC and larger motorcycles is far more difficult.

The pair of 18-inch alloy rims, steel fenders, and clean styling give the bike a nice presence, while the centerstand lends a level of convenience that is not so common these days. There is a pretty good aftermarket for the engine with lots of performance stuff. We’d go right for the stroker crank to take it back up to 500CC (shop eBay) and bump compression up from the stock 8.5:1 by a point or so. And get a freer-flowing pipe too. It’s a simple engine that lends itself to tinkering by a DIY owner.

And just think. Because it’s new there won’t be any stripped or rusted fasteners. That’s worth the $5,990 asking price right there. Well, that and the satisfaction of kicking your motorcycle to life. Fill

KICK STARTING THE 5R400 ISA (MOSTLY) VI NJ TAG E EXPERI ENCE MADE MODERN AND EASY WITH EL E C TRONIC FUEL INJECTION.

2015 YAMAHASR400

ENGINE TYPE

air-cooled single

DISPLACEMENT

399cc

SEAT HEIGHT

30.9 in.

FUEL CAPACITY

3.2 gal.

WET WEIGHT

384 lb. (cI~imed)

I:JII4~

$5990