New Models & Products

NEW MODELS & PRODUCTS

PERMANENT LETTERS

Iron-on permanent lettering for T-shirts, sweatshirts, riding jackets and other clothing is offered by H. Joseph Co., Dept. CW-3, 182 Teaneck Rd., Teaneck, NJ 07666. The letters are available in black or white, and are colorfast and guaranteed washable. A special backing makes the iron-on process speedy and lasting. Sizes are 2.25 in. high by 1.5 in. wide, 3.0 in. by 2.0 in., and 4.0 in. by 3.0 in. To order a suitable size of letter, measure the width of the line on which the wording will be placed, count the number of letters required, and select an appropriate size. Prices are $2 for 10 2.25-in. high letters, eight 3.0-in. letters, or six 4.0-in. characters. Each additional letter is priced 15, 20, or 30 cents, respectively. Minimum order is $2.

CHAPS FOR GUYS

Parr of Arizona is marketing two new products, a pair of Bike Boots, and a set of chaps. The boots are priced at $35, are handsome and functional, and are made in America. Manufactured from top grain cowhide, they are available in traditional black or oiled tan finishes. Sizes range from 7 to 12, increasing in half sizes. Parr’s chaps are manufactured from imported cowhide, with a nylon lining. Heavy duty brass zippers, and a lace-up rear for easy adjustment, are featured. Available colors are black with red lining, saddle tan with beige lining, cordovan brown with beige lining, and steel ice gray with royal blue lining. The price per pair is $40, from Parr of Arizona, Dept. CW-3, 4407 North 16th St., Phoenix, AZ 85016.

SWINGING SET

A set of 14 psychedelic decals known as “Blips” are available for $2 from motorcycle dealers, or from Metalflake, Inc., Dept. CW-3, P.O. Box 950, Dept. P, Haverhill, MA 01830. The new designs can be applied to motorcycles, cars, helmets, or any hard surface, by means of self-adhesive backings. Millions of tiny Metalflake particles are embedded in each decal. Blips are claimed to be resistant to chipping, and the effects of cold and wet weather.

NEW HONDA 350 CAM

The Precision Machining high performance cam for the Honda CL-350 and CB-350 now is available. When installed in a completely stock 350, the new cam greatly increases its performance. In bikes tested with standard gearing, 11,500 rpm was easily reached in 5th gear. Power range begins at 7000 rpm, though performance below this is smooth, even at idle. For scrambling purposes, long TT type exhaust pipes bring the engine onto the cam at much lower rpm. The cam is a drop-in item with no piston cutting, and will operate up to 12,000 rpm with stock valve springs; it has been tested on a production road racer ridden on California tracks by Bill Lyons. The cam profile is as follows: Inlet valve opens 30 degrees btc, closes 70 degrees abc; exhaust valve opens at 70 bbc, closes 31 ate; both lift 0.310 in. Cams are hardfaced and sold on an exchange basis only (a core must accompany each order). A one-year warranty is issued with each cam. Price is $75 exchange. Additional information will be supplied by Precision Machining, Dept. CW-3, 1209 Montgomery Ave., San Bruno, CA 94066.

SUPER FLOW CLEANER

Webco’s super flow air cleaner for Hodakas provides thorough filtration under all conditions, says the distributor. Its heart is the well-known Filtron element. The outer cover, of spun aluminum, is recessed to assure a positive seal for the element. The backing plate incorporates two reinforced brackets that mount to the engine and frame. The air cleaner is connected to the carburetor with standard Hodaka hose. The cleaner is available in several configurations, all of which are priced at $15.95. These are for Hodaka 90 and 100 using battery and tool box; with battery removed; using Webco intake manifold, Honda carburetor and right side exhaust; and using Webco intake, Honda carb and left side exhaust. Webco, Dept. CW-3, 218 Main St., Venice, CA 90293, will supply details.

BATTERY BEACON

Battery-operated Lifesaver Beacons are visible for a distance of more than 1000 ft., and can operate continuously for more than 30 hours. Distributed by Gene W. Goble and Associates, Inc., Dept. CW-3, P.O. Box 1057, 1478 Mission Rd., Escondido, CA 92025, Lifesavers are 7.75 in. tall, weigh only 8 oz., and are priced at $1.98 each. Each unit consists of a battery compartment topped with a heavy-duty flasher bulb. A square base enables the beacon to stand vertically on a road or other flat surface. The beacon is formed of acrylic plastic, and includes a heavy-duty flasher bulb, a stainless steel reflector connected to a spring brass strip, and two heavy-duty batteries. Rotation of its base turns the unit on or off. The distributor says it is weatherproof, will not rust or corrode, and will withstand many years of service life. Uses of the beacons are vast, particularly for motorcyclists, hunters, campers, and trail riders.

H-D EXTRAS

Harley-Davidson’s catalog of accessories is available from all the company’s dealers. The booklet lists a wide range of products, from clothing and helmets to instrument gauges. An ammeter kit is priced at $20.50, and a similar kit for an oil pressure gauge is listed at $18.90. The Tour-Pak, a large luggage carrier, is available for 1200-cc machines, and single-seat Sportsters, for $55. The Tour-Pak attaches to a flat channel type carrier by means of a lock that permits the rider quickly to remove the unit from his machine. HarleyDavidson’s battery tester is priced at $2.05, while $59.40 buys a fiberglass windshield for Electra Glides. Many other varied items are listed in the catalog.

(Continued on page 108)

Continued from page 106

BOOT FRESHENER

Boot ’n Shoe Dri absorbs moisture, odor, and perspiration from all kinds of footwear, from motorcycle boots to women’s high fashion boots. The product is comprised of two. bags, one for insertion in each boot or shoe. Overnight, footwear is dried out and made wearable again, says the maker, Boot ’n Shoe Dri, Dept. CW-3, P.O. Box 7076, Cleveland, OH 44128. After continuous use, the absorbent and freshening properties of the bags may be restored by placing them on a hot radiator, or in the sun, for 12 hours. The bags are priced at $2 per pair.

RAM SAFETY HELMET

A “Confoam” liner that adopts the shape of the rider’s head is prime feature of the RAM half-profile safety helmet. The helmet is Snell approved and conforms to Z90-1-1966 regulations. It is supplied in only two sizes, small/medium and large/extra large, which is where the self fitting liner comes in. There is a choice of two colors, white overall or two-tone blue and black. The RAM accepts all standard helmet accessories, and sells for $17.50. The price includes a visor and chin cup. It may be ordered direct by mail from Outrider Accessories, Inc., Dept. CW-3, 600 W. 52nd St., New York, NY 10019.

THE TRAIL-BREAKER

This unusual scooter has been around for several years and boasts fantastic climbing ability. Its secret is two-wheel chain drive and gobs of rubber. It’s slow, but it’ll take a rider of average skill just about anywhere he is brave enough to go—60-degree inclines, over boulders and logs, through snow and mire, across streams. The wheels are hollow, and may be filled with either water or gasoline. The Trail-Breaker is powered by a one-cylinder two-cycle Chrysler engine, mounted high for ground clearance. For additional information, write Rokon, Inc., Dept. CW-3, Wilmington, VT 05363.

HEATHKIT MINI

Heath Co., better known for its electronic products in kit form, now joins the rush into the minibike boom with the introduction of the GT-18 Trail Bike kit. Called the Heathkit “Boonie Bike,” it sells for $189.95. A 5-bhp Briggs & Stratton four-cycle engine powers the bike. The frame is a welded double loop, and suspension is rigid front and rear. The tires are tubeless. Weight of the bike is 116 lb.

An accessory for the GT-18, and perhaps adaptable to other minibikes, is the GTA-18-1 ski, which allows the rider to play about in the snow. It sells for $16.95. The Heath Co., Dept. CW-3, Benton Harbor, MI 49022, will answer questions.